Back to article
3348
Charging the battery
Find out how to charge the battery in your product so you can use it on the go.
To charge the battery:
If your battery is not connected to your product, see Replacing the battery in your product.
Connect the power supply from the DC POWER jack on your product to an AC (mains) outlet. The battery light glows yellow while charging and turns off when charged. Typically, the battery will fully charge in about 3 hours; this varies depending on the charge level and if the product is in use while charging. In some cases, it can take up to 10 hours to fully charge.
Tip: If the charger is connected when the battery is at or near full charge, it will not charge until the battery level drops to a level where charging is needed.
Connect the power supply from the DC POWER jack on your product to an AC (mains) outlet. The battery light glows yellow while charging and turns off when charged. Typically, the battery will fully charge in about 3 hours; this varies depending on the charge level and if the product is in use while charging. In some cases, it can take up to 10 hours to fully charge.
Tip: If the charger is connected when the battery is at or near full charge, it will not charge until the battery level drops to a level where charging is needed.
Plugging in overnight will not overcharge the battery
Lithium batteries have a built-in auto-off feature when a full charge is reached to prevent the battery from being overcharged. Even while still plugged in, the battery level will have to drop below a certain point to trigger the charging again.
Was this article helpful?
Thank you for your feedback!